Corrogard® WS is a water-based formulation designed to provide indoor protection to treated ferrous metal parts. The product is based on novel chemical compounds of low toxicity and odour. The product contains highly effective corrosion inhibitors to protect and passivate any active corrosion cells. Corrogard® WS is easily applied by brush or roller. When dry the product forms an adherent non-tacky polymeric film, which provides excellent protection even in very highly humid conditions. 

PRODUCT BENEFITS

1.    Corrogard® WS actives provide excellent corrosion protection in under cover spaces over prolonged periods, thus giving good cost performance.

2.   Corrogard® WS is water based, and does not contain any VOC’s as with conventional thin film protective oils.

3.   Corrogard® WS is fully biodegradable and environmentally friendly.

4. Corrogard® WS coatings are easily removed by a water wash, no solvents required, no flammability risk.

APPLICATION

Corrogard® WS is easily applied by brush, roller or conventional spray equipment. Parts may also be treated by immersion followed by allowing to drip dry. The product will find application wherever there is a need for indoor corrosion protection of ferrous metal parts and especially where a dry tack free film is required.

PRODUCT CHARACTERISTICS

Appearance: Customer can pick a tint.

pH: <8.0

Coverage: 25 sq. metres/ litre approximately

Film thickness: 7 microns